34 12
發新話題
打印

USB SPDIF 交流貼

Hi Anthony,
Well received,
煩請指導一下接駁1955pro的方法!
thanks a lot

TOP

請問應怎樣接駁1955pro呀?

TOP

引用:
原帖由 amhlee 於 2011-1-29 Sat 19:03 發表
須要呢件,不過只係一半
Anthony hing, shall i need this broad to connect notebook (has S/PDIF output) between 1955pro?

[ 本帖最後由 cvincent 於 2011-2-1 Tue 10:20 編輯 ]

TOP

wonderful and look great !
if it has input section button and VFD display with input info that will be perfect !!!!! ha ha !

TOP

請問幾時會出專配機箱 +VFD display呀!
......

TOP

Hi Anthony hing,
請問那條把田雨小板及1955pro 連接的 I2S cable 那裡可以買到?
如要用好一點的線材請問怎樣做?
thanks
cvincent

TOP

要, 是否 FOC 先

TOP

Great and thanks

TOP

thanks a lot

TOP

mdlover hing,
請問個 usb spdif case 裝左 display 未呀?

TOP

引用:
原帖由 mdlover 於 2011-2-11 Fri 19:22 發表
i have built this for a friend using the same chassis that kmax2007 hing used.
from the photos, you can see a display which is used to show the current sample rate that is streamed by the computer. it's a simple 7-segment display and it's ............

hi mdlover & anthony hing, 可否用這個機箱? 看似靚仔 d !

TOP

板大,個機箱同display幾時有呀? 好想試玩cas!

TOP

mdlover hing, thanks indeed

TOP

mdlover hing,
正呀! 就哩有得玩CAS啦! thankyou sosososo much
咁多你點比我地岈! 不如我地自己過哩取好嗎?
你今日得閒嗎?

TOP

我用的已是 8v (實際度出 7.4V) 1A 的萬用牛, 但 I2S 搞極都系 no signal.
還有在 Driver 裡 及 WlN7 control paneI 裡, 最高只可找到24 bit 192k, 找不到384k呀!
cable 方面已暫時惜用綱友的 Straight through LAN cable ....... 已用 foobar2000 pIays歌及已intall asio4all however still no sound ah !!!!!

[ 本帖最後由 cvincent 於 2011-7-20 Wed 11:03 編輯 ]

TOP

引用:
原帖由 Kevinyip 於 2011-7-20 Wed 11:27 發表

會唔會 I2S 板仍未接電 ?
I2S 板已從 usb spdif 板處取電

TOP

還是沒法搞出聲
usb spdif 盒收到foobar 信號, foobar已設定好driver,
現在平常聽歌是用CD player 同軸入1955pro 的,所以也試過用 usb spdif 盒 的同軸out 入1955pro並select set 了 input spdif,故巳排除I2S板及LAN cable 的問題了,但還是冇聲。請問各位ching 知道那裡出問題嗎 ?

TOP

引用:
原帖由 amhlee 於 2011-7-20 Wed 23:37 發表
usb spdif 盒 的同軸out 入1955pro 有無聲?
板大,已試過了,也是冇聲

TOP

板大, thanks a lot. do you have time this Saturday 23/July?

TOP

引用:
原帖由 Kevinyip 於 2011-7-21 Thu 09:46 發表

唔係問我借...Cvincent 話佢自己的 lan cable pin assignment 係 18, 27, 36.... o個種, 唔係你俾佢o羊 ?
The lan cable is borrowed from the estate web friends  .... who helped me to do a straight-thru cable. However, I need to return it to him afterward......

[ 本帖最後由 cvincent 於 2011-7-21 Thu 13:44 編輯 ]

TOP

引用:
原帖由 mdlover 於 2011-7-21 Thu 14:26 發表

if you are going on 23/July, let me know and i will try my best to join and see if i can find out the culprit.
mdlover hing,
Thank you so so so so for your great support as always! Same appreciation to 板大!
I will bring my laptop, power supply, lan cable as well as the usb box together.
hopefully, we can figure out where is the problem.

TOP

Thank you so much to 板大 for your help, now my USB SPDIF box is working (only AES but not I2S).
Now I connect the power input for USB SPDIF box directly from the 昇頻板 電源位 在1955 PRo 内取電
, 輸出為7.9V - 8.0V,  估計應該是 A 不足 so it's only AES works, I2S still doesn't work that I think.

TOP

引用:
原帖由 amhlee 於 2011-7-25 Mon 12:13 發表
話好危險,個到有 CPU, VFD, 昇頻,加 USB, 成 1A loading....
i2S 唔 work, 和電流無關系,都係 cable 問題!
Oh no !!!!! I see I need to disconnect immediate tonight ...........
already used your given LAN cable ...... so what is the problem?

[ 本帖最後由 cvincent 於 2011-7-25 Mon 12:25 編輯 ]

TOP

剛已disconnected!並發現了原來供電比display的block牛是有2組9V 18VA 2AT 輸出的,現只用了一組比1955pro 的display。
請問另一組可否加片隱壓板比電USB SPDIF 盒呢?

TOP

明白了,謝版大!

TOP

個case好靚仔呀!

TOP

真奇怪,現巳從9V block 牛直接取電,經穩壓板8V 比電 usb spdif 盒,但I2S仍用不到,不知道那裡出問題?

TOP

小棠哥部機? 精神線真是有其魔力!

TOP

引用:
原帖由 amhlee 於 2011-10-6 Thu 22:03 發表
唔使偷••••
個hd 夠大就得••••
今日試左兩樣野,
有幾突破性發展,
十一月來聼時可比較一下•••
Yes, Sir

TOP

這個度身造鋁箱, 手工ㄧ流, 請問有冇團購呀!

TOP

 34 12
發新話題