發新話題
打印

USB SPDIF 交流貼

引用:
原帖由 monza165 於 2011-4-13 Wed 11:00 發表

I2S Cable 冇問題
不如我開個post問下仲有冇人要,一次過整啦
機內排線 (USB to 田雨 I2S 小板) 可在那裡買?因個人喜好,多數都係DIY
其實我應買那隻牛牛陴 USB Board (7v ~ 10V) and I2S 小板 (7v ~ 10v)?買隻好 ...
為人民服務!
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

some updates, i2s board mounted and back panel updated.



TOP

唔錯!唔錯!
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

會否把輸入電源改掉?

TOP

剛剛 upgrade to 32 bit. 可惜無 DAC 可以 support.......
附件: 您所在的用戶組無法下載或查看附件
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

Upgrade 可以用 Mac 來做,亦可以用 window. Mac 就麻煩的,要用 command mode, terminal....
剛剛連上 DAC,聽感上還是和原來的分別.....值得昇級.....

[ 本帖最後由 amhlee 於 2011-4-20 Wed 21:48 編輯 ]
附件: 您所在的用戶組無法下載或查看附件
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

mdlover hing,
請問個 usb spdif case 裝左 display 未呀?

TOP

引用:
原帖由 mdlover 於 2011-4-15 Fri 23:53 發表
some updates, i2s board mounted and back panel updated.



TOP

some more updates, a translucent front panel installed with LED display,








sample rate of the current audio stream will be displayed, when the stream stop, display show "----"

sorry for the crappy photos, i just couldn't take great pictures like anthony does.......

TOP

dear Mac users, a new custom app that is used for upgrade new firmware is in progress.

i know it's a bit inconvenient to use command line program in a terminal nowadays........

TOP

請問在哪裡升級?如何找檔?

TOP

個檔在我處,現在試緊!如無問題,就會發給你。
另外個箱看看有無問題........
個箱無位放 IEC 座,但可放電源,要引條線...
附件: 您所在的用戶組無法下載或查看附件
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

引用:
原帖由 marvintai 於 2011-4-24 Sun 17:20 發表
請問在哪裡升級?如何找檔?
你終於玩夠返來?

TOP

引用:
原帖由 mdlover 於 2011-2-11 Fri 19:22 發表
i have built this for a friend using the same chassis that kmax2007 hing used.
from the photos, you can see a display which is used to show the current sample rate that is streamed by the computer. it's a simple 7-segment display and it's ............

hi mdlover & anthony hing, 可否用這個機箱? 看似靚仔 d !

TOP

呢個後面放唔到 i2s....,係華輝有。
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

引用:
原帖由 DeepSea^^ 於 2011-4-24 Sun 23:32 發表

你終於玩夠返來?
你估錯了,我還在上海。

TOP

用SPDIF 有無特別要SET (我用 MAC)

試左幾部DAC 都係LOCK 唔到SIGNAL

TOP

引用:
原帖由 medicalking 於 2011-5-13 Fri 00:49 發表
用SPDIF 有無特別要SET (我用 MAC)

試左幾部DAC 都係LOCK 唔到SIGNAL
fixed.. forgotten that need to change back to 192 K

TOP

After few attempts, I can now control my windows XP iTunes with my iPad2 apple remote apps. However, I am not able to hear any music when I play the music in iTunes.
Can someone teach me how to export the iTunes sounds to the USB board?
Remark: I have no issue to play any music with Foobar2000 in the same computer.

TOP

In the control panel. need to set the sound output device as USB .
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

thinking able to re-use this case.....
附件: 您所在的用戶組無法下載或查看附件

TOP

引用:
原帖由 amhlee 於 2011-4-24 Sun 17:52 發表
個檔在我處,現在試緊!如無問題,就會發給你。
另外個箱看看有無問題........
個箱無位放 IEC 座,但可放電源,要引條線...
USB 板電源輸入的背面,有三點,請問哪兩點接入 I2S 的電源輸入?

TOP

用萬用表量一下咪知點係正負啦....
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

拆驣了好一段時間...終於弄好了....I2S 放 CAS...真是無錯...
附件: 您所在的用戶組無法下載或查看附件
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

引用:
原帖由 amhlee 於 2011-6-18 Sat 14:38 發表
拆驣了好一段時間...終於弄好了....I2S 放 CAS...真是無錯...
可喜可賀!

TOP

板大,個機箱同display幾時有呀? 好想試玩cas!

TOP

訂造要點時間.....
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

唔知未訂塊 USB SPDIF interface 的,還有無人想訂,齊 10 個團購會有 discount...

[ 本帖最後由 amhlee 於 2011-6-18 Sat 23:45 編輯 ]
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

TOP

是的....
唔做死硬派,泥頭,奶頭,菜頭都玩.....

TOP

發新話題